Prototype · DFM refinement · validation in progress
Joint Ops™ Performance Bench
The Interface, Integrated.
One bench. Two selectable surfaces. A coordinated positioning system built around the athlete.
Keep the familiar flat-bench condition when specificity matters. Select the Performance Interface™ when deliberate clearance, torso support, and repeatable positioning are the goal.
Current prototype and CAD reference. Geometry, mechanisms, dimensions, weight, finish, and accessories remain subject to engineering and production validation.
Commercial statusPrelaunch platform in development
Research statusPrototype study underway; no results claimed
Immediate pathwayThe Launch Pad® is available now
One bench · two legitimate jobs
Keep the baseline. Add the training surface.
Joint Ops™ preserves conventional bench function and adds a deliberately shaped athlete-to-bench interface.
Use the planar surface for specificity and familiar practice. Select the contoured surface when the objective calls for a different contact relationship.
Standard flat mode · current prototype CAD
Intent 01 · preserve specificity
Use the familiar surface when familiarity matters.
The planar condition remains available for competition practice, standardized testing, and familiar technique work.
Surface
Substantially planar torso support
Training intent
Specific practice and familiar setup
Bench function
Flat and incline use remains available
Performance mode · current prototype CAD
Intent 02 · select performance geometry
Change the contact surface—not the exercise.
The contoured surface changes the relationship around the shoulders, torso, lumbar section, and seat while preserving familiar pressing.
Surface
Contoured torso-contact geometry
Training intent
Deliberate contact and positioning
What changes
The athlete-to-bench interface
01 · Clearance
Create more usable space around the shoulders.
The contour is designed to reduce how much of the upper body is boxed in by a full-width pad.
02 · Relationship
Treat torso, lumbar, and seat as one relationship.
The platform coordinates these contact points instead of treating them as unrelated adjustments.
03 · Repeatability
Defined landmarks instead of improvised setup.
Visible settings are intended to make a chosen setup easier to reproduce.
The defining mechanism
The exercise stays familiar. The active surface changes.
A rotating, indexed torso assembly places either surface in the active position.
DFM may change the production mechanism—not the functional choice.
Planar surface selected.
The planar surface indexes into position for familiar flat and incline use.
Surface selection in progress.
The prototype demonstrates rotation, indexing, and locking between the two surfaces.
Performance surface selected.
The contoured surface becomes active while flat and incline functions remain available.
These images document prototype function. Final force, hardware, geometry, and operation remain subject to validation.
A coordinated setup system
Surface selection is only the beginning.
Back angle, lumbar position, seat angle, and seat travel define the athlete’s relationship to the active surface.
Joint Ops™ is designed to make that relationship visible, selectable, and repeatable.
Current prototype · adjustable back assembly
Back-angle relationship
Carry both surfaces from flat into incline.
Both surfaces remain usable as the back moves from flat through incline.
Current design target: 0°, 20°, 30°, 45°, 60°, and 75° indexed positions.
Current prototype · indexed lumbar adjustment
Lumbar relationship
Define the lower-back relationship.
Indexed support defines the relationship between the lower back, torso surface, and seat.
Current prototype target: four visible indexed lumbar positions.
Current prototype · seat-angle adjustment
Seat-angle control
Make seat angle part of the setup.
Seat angle works with the back, lumbar section, and selected surface.
Current design target: 0°, 10°, 20°, and 30° seat positions.
Current prototype · fore-aft seat adjustment
Seat fore-aft position
Adjust the seat-to-back distance.
Fore-aft travel adapts the seat relationship to angle and athlete dimensions.
Current prototype function: visible indexed travel with secure positional locking.
Listed positions are current targets. Final ranges, markings, hardware, and geometry remain subject to validation.
Familiar exercises · selectable conditions
One platform should not force one contact condition.
Both surfaces are demonstrated across familiar flat and incline pressing.
Standard mode
Incline barbell pressing
Use conventional support when familiar setup and specificity are the priority.
Two surfaces
Same angle. Different surface.
Select either surface on the same adjustable platform.
Performance mode
Flat dumbbell pressing
The bottom position makes the contoured contact relationship easier to inspect.
System relationship
Coordinated contact
The seat, lumbar section, and active surface function as one positioning relationship.
Prototype demonstrations show configuration and design intent—not measured outcomes.
Built for the room
Built for rooms where setup quality and versatility both matter.
Strength & conditioning
Coach two intentions from one station.
Preserve familiar practice while adding a second training surface.
Tactical human performance
Create repeatable stations for varied populations.
Visible settings support structured use across teams and coaching staffs.
Performance centers & commercial gyms
Add differentiation without two footprints.
Offer conventional bench use and a distinct interface in one platform.
Serious individual lifters
Keep the baseline. Expand the setup.
Move between familiar specificity and deliberately shaped support.
Development and validation
A functional prototype is not a finished product.
The prototype proved the system. DFM is turning it into a durable, serviceable production platform.
01
Prototype proven
The two surfaces and coordinated adjustments exist as integrated hardware.
02 · Current
DFM refinement
Weight, handling, mechanisms, durability, serviceability, and cost are being engineered toward production.
03
Demonstration & validation
Production-intent units will support facility feedback, quality checks, and research.
04
Commercial release
Specifications, pricing, availability, and support follow validated engineering.
Express interest in Joint Ops™ and tell AMM what you would use it for. Joining begins a follow-up conversation; it does not reserve a bench or guarantee allocation, availability, or a release date. Facilities and industry partners can use the dedicated AMM partnership routes above.
Join for updates relevant to your role. Additional fields appear only when they are useful.
Launch Pad® findings are not Joint Ops™ results. Each product’s claims must stand on its own evidence.
The essential questions
Joint Ops™, clarified.
Is Joint Ops™ available now, and is there a final price or release date?
No. Joint Ops™ is in DFM refinement and validation. Pricing and availability follow production engineering, supplier economics, quality requirements, and validation evidence. The priority list is not a preorder.
How does the selectable surface work?
The prototype uses a rotating, indexed torso assembly to activate either surface. DFM may change the mechanism while preserving that choice.
What adjusts besides the surface?
The back angle, lumbar section, seat angle, and seat fore-aft position adjust. Final ranges and hardware remain subject to validation.
What stage is the product in, and will production match the prototype exactly?
The integrated prototype is functional and in DFM refinement. Geometry, weight, transport, storage, hardware, finish, attachments, and service features may change before production.
Do The Launch Pad® studies establish Joint Ops™ outcomes?
No. Those studies evaluated The Launch Pad®. Joint Ops™ research is in progress, and no Joint Ops™ result is claimed here.
The next chapter
One bench. Two intentions. Built around the athlete.
Follow the integrated platform—or experience the interface today.
